Programming; ‘Stat’ Led (Green); 3 Color ‘Fan’ Led - SPAL FAN-PWM-V3 Instructions For Use Manual

Programming

ENTR PRG STAT FAN
'Stat' LED (Green):
• On when FAN-PWM is powered from the ignition input. Fan(s) are not on.
• Blinking indicates an error code. See page 21 for error codes.
3 Color 'Fan' LED:
• RED: High temperature setting has been reached.
• Fan(s) run at High speed.
• AMBER: Low temperature setting has been reached.
• Fan starts at half-speed and increases until High temperature setting is
reached.
• GREEN: Indicates Air Conditioning has been powered ON.
• Fan(s) run at full speed.
11 www.spalusa.com