KVH Industries TracVision TV3 Installation Manual page 36

B Continued
Genie Configurations
Full DECA Broadband functionality is built into
Genie DVRs (HR44 or HR34). So if a Genie DVR
is present on the DIRECTV SWM network, no
external DECA Broadband kit is required. Just
connect the Genie's Ethernet port to the TV-Hub's
Ethernet port, either directly or via an onboard
router (see Figure 62). The Genie DVR provides
the link between the DIRECTV coax network and
the Ethernet network.
NOTE: If you cannot easily connect the Genie DVR's
Ethernet port to the TV-Hub or an onboard network,
you can use a DECA Broadband Kit, as explained in
"Non-Genie Configurations" on page
NOTE: Genie clients cannot switch satellites; they
can only view programming carried by the satellite
that is currently selected.
Using a DIRECTV Coax Network
Figure 62: Genie Configuration
TV-Hub
34.
SWM
Ethernet
Can connect via an
onboard network
(router), if desired
Supports up to 8 tuners:
Each SWM receiver = 1 tuner
SWM Splitter
Each SWM DVR = 2 tuners
Each Genie DVR = 5 tuners
Each Genie client = 0 tuners
Connect any combination of SWM receivers/DVRs
that add up to 8 or fewer tuners at the SWM splitter
New Receiver Models:
HR24, H24, H25
Satellite In
Genie Client Models:
C31, C41
Network AC Power
Genie DVR:
HR34 or HR44
Ethernet
COMPONENT VIDEO OUT
Y Pb Pr
DIGITAL
AUDIO OUT
SATELLITE IN 1
L R
IR RECEIVE ETHERNET VIDEO OUT AUDIO OUT S-VIDEO OUT SATA
Satellite In
AC Power
POWER INPUT
HDMI USB PHONE JACK
AC Power
35