Installing Client Software For Novell Printing - Toshiba e-studio 165 Printing Manual

Installing client software for Novell printing

This section describes how to install the client software for Novell printing on NetWare print
server environments.
There are three ways to set up the printer drivers for Novell printing:
Using the installer in the Client Utilities CD-ROM
When you insert the Client Utilities CD-ROM into your CD-ROM drive, the installer automati-
cally starts. You can install printer drivers and other client software using the installer. If you
want to install printer drivers as well as other client software, this method is convenient.
P.74 "Installation for Novell printing using the installer"
Using Point and Print
You can install the printer driver by double-clicking network queues on the NetWare. If the
NetWare has been set up for NDPS, printer drivers can be downloaded from the system so
that the Client Utilities CD-ROM is not required.
P.79 "Installation for Novell printing by Point and Print"
Using Add Printer Wizard
When you want to install the printer drivers without connecting to the equipment using Point
and Print, install the printer drivers using the Add Printer Wizard.
P.86 "Installation for Novell printing by Add Printer Wizard"
The Font Manager is available to install and manage the TrueType fonts on your computer. To
install the Font Manager, you must install it from the Client Utilities CD-ROM.
P.246 "Installing Font Manager"
Before installing the printer driver for Novell printing, check with your system administrator to
make sure of the following:
- This equipment is connected to the network and turned on.
- The NetWare server is configured correctly and running on your network.
- The IPX/SPX or TCP/IP, and NetWare settings are correct on this equipment.
Before installing the client software for Novell printing, please make sure following network ser-
vices and protocols are installed on your computer:
Windows 98/ME
TCP/IP protocol (Required only when using the NetWare in the TCP/IP network.)
IPX/SPX-compatible protocol (Required only when using the NetWare in the IPX/SPX net-
work.)
Client for NetWare Network
Service for NetWare Directory Service (Required only when using the NetWare server in
NDS mode.)
Windows NT 4.0
TCP/IP protocol (Required only when using the NetWare in the TCP/IP network.)
NWLink IPX/SPX Compatible Transport protocol (Required only when using the NetWare in
the IPX/SPX network.)
NWLink NetBIOS protocol (Required only when using the NetWare in the IPX/SPX network.)
Gateway (and Client) Services for NetWare
Installing Client Software for Windows 73