Toshiba e-studio 165 Printing Manual page 199

5
If you want to print or insert a back cover, check the "Use Back
Cover" box and then select, at the "Source" drop down box, the
drawer where the back cover is loaded. Also, at the "Print Style"
drop down box, select whether you are inserting a blank cover or
printed back cover. Then select the paper type for a back cover at
the "Paper Type" drop down box.
Print Style
This selects how you want to print a back cover.
- Do not print on page — Select this to insert a blank cover.
- Print on 1 side of page — Select this to print the last page image on the front
side of a cover.
- Print on both sides of page — Select this to print the last two page images on
both sides of a cover.
Paper Type
This sets the media type of the paper.
- Plain — Select this when printing on 20 lbs plain paper (64-80 g/m
- Thick1 — Select this when printing on 24-28 lbs thick paper (81-105 g/m
paper).
- Thick2 — Select this when printing on 32-90 lbs thick paper (106-163 g/m
paper).
- Transparency — Select this when printing on transparent sheets.
When "Automatic" is selected in the "Source" drop down box, the paper is automati-
cally selected according to the printed document size.
"Print on both sides of page" is available only when 2-Sided printing is enabled at the
Setup tab.
Only one page will be printed on the back cover when only one page is remained for
the back cover page, even if "Print on both sides of page" is selected.
The same paper type applies to both front cover and back cover. When the paper
type for either cover is changed, the paper type for other cover is automatically set to
the same one.
6
Set other print options you require and click [OK].
7
Click [OK] or [Print] to send a print job.
Multiple pages are printed per sheet.
2
plain paper).
2
Printing from Windows
thick
2
thick
199