Setting The Test Tone - Samsung MAX-DA79 User Manual

PM Page 38
the Speaker Mode
cy responses from the speakers will automatically be adjusted
onfiguration and whether certain speakers are used or not.
Press Cursor
2
button to move to
'Audio' and then
press ENTER button.
Press Cursor , ,
, buttons to move
4
to the desired
speaker and then
press ENTER button.
For C,SL, and SR, each time the button
is pressed, the mode switches
alternately as follows: SMALL NONE.
For L and R, the mode is set to SMALL.
talled.
gh Center CH can toggle between SMALL and NONE,it is not relevant to
r settings be signals are distributed to FRONT L-CH and R-CH by
g a virtual Center CH.(Default setting is SMALL).
KER SETUP ---Available only in DVD.
Downloaded From Disc-Player.com Samsung Manuals

Setting the Test Tone

Press the Test Tone to check the speaker connections and to adjust the speaker levels.
Press Cursor
In Stop mode,
1 2
button to move to
press MENU
'Audio' and then
button.
press ENTER button.
Note
•
The test tone functin is not available while HDMI AUDIO ON.
Press RETURN button to return to the previous level.
Press MENU/EXIT button to exit the setup screen.
ENG
Press Cursor button
3
to move to 'TEST
TONE' and then press
ENTER button.
•
The test tone will be sent to L C
R SR SL SW in that order.
If the ENTER button is pressed again
at this time, the test tone will stop.
48