HP 9000 Series 319C+ Service Handbook page 6

Examples:
WARNING
The power supply presents a hazard to personnel.
Extreme care must be taken when connecting
voltmeter probes to the test points. De-energize
the product by turning it off and removing its
power cord before connecting or removing test
probes.
I
CAUTION
I
The printed circuit assemblies in this product
are susceptible to damage by electro-static dis-
charge. Extreme care must be taken when han-
dling printed circuit assemblies. Use an Anti-
static Workstation while handling printed circuit
assemblies.
Note
Hewlett-Packard supports repair of this product
only to the assembly level. The fault is diagnosed
to the assembly that is causing the problem. That
assembly is then replaced with a new or rebuilt
one.
vi Notices