Magic Remote Control Functions - LG PH47 series Owner's Manual

28

MAGIC REMOTE CONTROL FUNCTIONS

MAGIC REMOTE CONTROL FUNCTIONS
This item is not included for all models.
When the message "Magic Remote Control battery is low. Change the battery." is displayed,
replace the battery.
To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching
and ends to the label inside the compartment, and close the battery cover. Be sure to
point the remote control toward the remote control sensor on the TV.
To remove the batteries, perform the installation actions in reverse.
CAUTION
y Do not mix old and new batteries, as this may damage the remote control.
(Only PH67**)
(POWER)
Turns the TV on or off.
Returns to the previous level.
Wheel(OK)
Selects menus or options and
confirms your input.
Scrolls through the saved
programmes.
If you press the navigation button
while moving the pointer on the
screen, the pointer disappears,
and the Magic Remote Control
works as a regular remote control.
To display the pointer again, shake
the Magic Remote Control from
side to side.
Used for viewing 3D video.
voice recognition (Depending on model)
Network connection is required to use the voice recognition function.
The recognition rate may vary depending on the user's characteristics (voice, pronunciation, intonation and speed)
and the environment (noise and TV volume).
1 . Press the Voice recognition button.
2 . Speak when the voice display window appears on the left of the TV screen.
• The voice recognition may fail when you speak too fast or too slow.
• Use the Magic remote control no further than 10 cm from your face.
BACK
BACK
Pointer (RF transmitter)
Navigation buttons
(up/down/left/right)
Scrolls through menus or options.
SMART
SMART
Accesses the Smart Home menu.
voice recognition
(Depending on model)
/Q.MENU
/ Q.MENU
Q.MENU
Accesses the quick menus.
P
Accesses the Universal Control.
+ -
Adjusts the volume level.
ꕌPꕍ
Scrolls through the saved pro-
grammes or channels.
MUTE
Mutes all sounds.