Product Information; Installation Requirements - Wolf 30" GAS COOKTOP Installation Manual

GAS COOKTOPS

Product Information

Important product information including the model and
serial number are listed on the product rating plate. The
rating plate is located on the bottom of the cooktop. Refer
to the illustration below.
If service is necessary, contact Wolf factory certified service
with the model and serial number. For the name of the
nearest Wolf factory certified service or for questions
regarding the installation, visit the contact & support section
of our website, wolfappliance.com or call Wolf customer
care at 800-222-7820.
RATING PLATE
Rating plate location.

Installation Requirements

A minimum 2" is required from the bottom of the
(51)
cooktop to combustible materials. If the cooktop is installed
above an oven, a minimum of
units.
Electrical
Installation must comply with all applicable electrical codes.
Locate the electrical supply as shown in the illustrations
on the following pages. A separate circuit, servicing only
this appliance is required. A ground fault circuit interrupter
(GFCI) is not recommended and may cause interruption of
operation.
ELECTRICAL REQUIREMENTS
Electrical Supply
Service
Receptacle
Power Cord
1 / " is required between
(6)
4
grounded, 120 VAC, 60 Hz
15 amp dedicated circuit
3-prong grounding-type
6'
(1.8 m)
|
wolfappliance.com 3