Panasonic VIERA TH-L32E30Z Operating Instructions Manual page 15

■
[Wireless]
3
Select the connection type
Connection Type
Please select network connection type.
Search for access point
WPS(Push button)
■
[Search for access point]
Access points found automatically are listed.
Available Access Points
No. SSID
1 Access Point A
2 Access Point B
3 Access Point C
Encryption Key Setting
Connection will be made with the following settings:-
SSID : Access Point A
Authentication type : WPA-PSK
Encryption type : TKIP
Please input the encryption key.
Encryption key
Access Point Settings
Encryption key
A B C D E F G H I J K L M N
U V W X Y Z 0 1 2 3 4 5 6
a b c d e f g h i j k
u v w x y z ( ) + - .
Access Point Settings
Encryption key is set to:-
XXXXXXXX
Select 'Yes' to confirm.
Select 'No' to change.
Yes
■
[WPS(Push button)]
WPS(Push button)
1) Please press the 'WPS' button on the access
1) Please press the 'WPS' button on the access
point until its light flashes.
point until its light flashes.
2) When the light is flashing select 'Connect' on TV.
2) When the light is flashing select 'Connect' on
TV.
If you are unsure, please check the instruction If you are unsure, please check the instruction
manual of the access point.
manual of the access point.
Connect
Perform the connection test after the access point setting is finished
Connection Test
Check access point connection.
Check acquired IP address.
Check for devices using same IP address.
Check gateway connection.
Check server connection.
Conplete the network connection
4
(Press twice)
1
Select your desired access point
Wireless type Encrypt Reception
11n(2.4GHz)
11n(5GHz)
11n(5GHz)
2
Access the encryption key input mode
•
If the selected access point is not encrypted, the confirmation
screen will be displayed. It is recommended to select the
encrypted access point.
3
Enter the encryption key of the access point
(Set characters one by one)
O P Q R S T
7 8 9 ! : #
l m n o p q r s t
* _
•
You can set characters by using numeric buttons.
4
Select [Yes]
•
To re-enter the encryption key, select [No].
•
If the connection has failed, check the encryption key, settings
No
and positions of your access point. And then, follow the on
screen instructions.
Press the WPS button on the access point until the light flashes.
And then, press the OK button to connect the Wireless LAN
Adaptor and the access point.
•
Ensure that your access point supports WPS for this method.
•
WPS: Wi-Fi Protected Setup™
•
If your access point supports WPS (Push
select
button), then select this option. If not,
confirm
select [Search for access point].
•
select To search access points again
•
For the information of the
access
highlighted access point
•
To set manually (p. 64)
select
RETURN
Store
set
select
set
: succeeded
The test is successful and the TV is connected to the
network.
: failed
Check the settings and connections, and then select
[Retry].
•
To set manually, select [Manual] and set each item.
For details (p. 64)
Y
INFO
R
15