Flush-Mounted Delegate's Unit Edc-1024 - Optimus EDC-1000 SERIES Installation And Operating Instructions Manual

5.6. Flush-mounted Delegate's unit EDC-1024

Function explanations:
1. Press "TALK" button to start talking. The "TALK" button is with back-lighted indication lamp and
Microphone with red LED to show its ON/OFF.
2. When turn on the conference unit, build-in speaker will be silent to prevent echo.
3. Microphone and stand are design separated. It is easier for installation, repair, maintained,
transportation, pack and storage.
4. Hidden wiring is adopted. There is two hidden DB9 configuration slot for connector in the stand.
When install, just plug one by one (daisy-chain). Holes can be drilled under the seat when
installed, which will enable hidden wiring and maintain the appearance of the conference hall
nice and neat.
EDC-1000 Version 1.2
EDC-1000 SERIES
Conference System
(1) TALK button（with
indication lamp)
(2) Earphone output plug with volume
control
(3) REC output plug
(4) Microphone plug（XLR TYPE)
(5) Wire plug
back-lighted
Page 17 of 19