Table of Contents
Advertisement
Using Your Kambrook Heater
Setting the Heating Mode and
Variable Temperature
• The 'HEAT' control acts as an
automatic thermostat and can
be used to maintain your desired
room temperature.
• To set the desired room
temperature, turn the 'SETTING'
control to the desired setting
and the 'HEAT' Control to the
'MAX' position.
• Once a comfortable room
temperature has been reached,
slowly turn 'HEAT' control anti-
clockwise until a click sound is
heard. At this setting your heater
will automatically cycle on and
off to maintain the desired room
temperature.
•
If 'SETTING' 1 is selected, the
top element will automatically
cycle on and off. If 'SETTING' 2 is
selected both the top and bottom
elements will automatically cycle
on and off.
NOTE: The middle element of
the heater will remain on all the
time while the heater is in use.
NOTE: This heater features a
tip-over switch. If the heater
tips over, the quartz heating
elements will automatically
switch off. Once placed back
into the upright position, the
quartz heating element will
automatically switch on again.
10
continued
Advertisement
Table of Contents
