Advertisement
Quick Links
Advertisement
Related Manuals for Kambrook KCE520
Summary of Contents for Kambrook KCE520
- Page 1 Ceramic Heater Instruction Booklet KCE520...
- Page 2 In the event that you need some assistance with your Kambrook appliance, please contact our Customer Service Department on 1300 139 798 (Australia) or 09 271 3980 (New Zealand). Alternatively, visit us on our website at...
- Page 3 Contents Kambrook Recommends Safety First Your Ceramic Heater Quick Start Guide Using Your Ceramic Heater Care and Cleaning Warranty Details...
- Page 4 IMPORTANT: Please retain your instruction book for future use. At Kambrook, we believe that safe performance is the first priority in any consumer product, so that you, our valued customer can confidently use and trust our products. We ask that any electrical appliance that you use be operated in a sensible fashion with due care and attention placed on the following important operating instructions.
- Page 5 If found damaged in any way, immediately cease use of the heater and return to Kambrook or an authorised service agent for inspection or repair. NOTE: This Kambrook Ceramic Heater is electronically...
- Page 6 Your Ceramic Heater 1800 watt ceramic heating element for efficient heating LCD screen ThermoGuard protection for peace of mind Control Panel Convenient 8hr auto-off timer 2 heat setting, plus auto mode and fan only setting Power/Swing button to turn the heater on and off, and activate the 90°...
- Page 7 • Don’t overheat your home. The temperature of a heated room in winter should be 18-21°C • Your heater will work more efficiently if you stick to Kambrook’s recommended clearance spaces • Choose the right size heater for the room type you want to heat •...
- Page 8 Using Your Ceramic Heater Before First Use Remove any promotional material or packaging from the heater. Unwind the cord to its full length and place the heater on a firm, level surface in a stable upright position. Visually inspect the air inlet and outlets to ensure there are no blockages.
-
Page 9: Safety Features
Setting the Variable Temperature The variable temperature can be used to maintain your desired temperature. NOTE: The variable temperature only operates when the heater is being used in the Auto mode. Press the MODE button until the heater is set to AUTO mode. The LCD screen will display the default temperature of 25°C and will flash. - Page 10 Using Your Ceramic Tower Heater continued ThermoGuard Overheating Safety Device Your heater is fitted with a safety device that switches off the heater in the event of overheating. Should this heater stop working, turn off the heater and inspect the air inlet and outlet for blockages.
-
Page 11: Care And Cleaning
Care and Cleaning Ensure that the heater is switched off and disconnected from the power point before cleaning. Use a clean, dry cloth to clean the external surfaces of the heater. If the heater has collected dust or dirt inside the unit or around the elements, have the unit cleaned by a qualified service agent. - Page 12 Act 1993 in relation to the appliance. It applies in addition to the conditions and guarantees implied by that legislation. This Kambrook Replacement Warranty is valid only in the country of purchase, but other statutory warranties may still apply. This Warranty card and the purchase receipt for this...