Hardware Installation - Ace Plus EX-G048D User Manual

ACE PLUS CORP.

Hardware Installation

We suggest you connect the monitor with the lowest resolution support to the DVI-OUT
1. (e.g. Suppose monitor A might support a maximum resolution of 1920 x 1200, monitor B
supports a maximum resolution of 1280 x 1024 and monitor C supports a maximum
resolution of 1024 x 768, please connect monitor C to DVI-OUT 1).
Unless you would like to use the default universal EDID, please set DIP switch 2 at off
position, which allows the EX-G048D to read the first monitor's EDID.
1. Connect a monitor, a projector or other displays with DVI inputs by a male-to-male DVI
cable to EX-G048D DVI-OUT 1.
2. Connect the second display to the DVI-OUT 2.
3. Connect the third display by 1 CAT5e cable and the DVI over CAT5e Mini-Extender
(EX-G026A) through RJ45 connectors on both sides.
4. Plug 5V DC power adapter into power jack.
5. Connect a PC or other devices with DVI outputs to DVI Splitter DVI-IN.
DVI cable
Page 7 of 8
DVI-OUT2
DVI-IN
DVI-OUT1
RJ-45
DVI cable
DVI cable
CAT5e cable
DVI over CAT5
Mini-Extender
Headquarters :
9F-2., No. 190 Sec. 2 Jung Shing Rd.,Hsin-dian,
Taipei, Taiwan 231
TEL: +886-2-2912-4201
FAX: +886-2-2912-3164
Website: www.ace-plus.com
www.ace-plus.tw