Related Manuals for Ace Plus EX-G048A
Summary of Contents for Ace Plus EX-G048A
- Page 1 ACE PLUS CORP. EX-G048A 1x3 DVI Splitter Data Sheet Page 1 of 11 Headquarters : 9F-2., No. 190 Sec. 2 Jung Shing Rd.,Hsin-dian, Taipei, Taiwan 231 TEL: +886-2-2912-4201 FAX: +886-2-2912-3164 Website: www.ace-plus.com...
-
Page 2: Safety And Notice
However, like all electronic equipments, EX-G048A should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit. - Page 3 ACE PLUS CORP. Introduction The EX-G048A receives and reconstructs (equalizing & reclocking) a DVI signal and distributes it to three identical outputs. It can be perfectly cascaded with one another in order to obtain more DVI outputs (at least 6 tiers). Each output can be turned on/off individually through an IR remote control.
-
Page 4: Package Contents
ACE PLUS CORP. Features Connects a DVI video source to 3 DVI compatible displays (comes with a DVI Y-cable) Perfectly as a repeater by regenerating the DVI signal Stackable, 8 devices stacked can support up to 17 outputs IR remote control allows switching outputs... -
Page 5: Front Panel
1. Connect a DVI display here. 2. Connect a DVI display or two displays by a DVI Y-cable. *While cascading, use the short line of the DVI Y-cable to connect to the next EX-G048A DVI input and the long line to connect to a display. -
Page 6: Bottom Panel
LED lights. The green LED will turn of after the reading process is completed. Warning!! Don’t plug in DVI source while the EX-G048A is writing default EDID or recording EDID from displays. This will cause damage to the EDID in the flesh memory. -
Page 7: Hardware Installation
3. Connect the second display to the DVI female connectors of the long line of the Y-cable and plug in the short line of the Y-cable to the DVI-IN of the second EX-G048A. Connect the third display to the DVI-OUT 1 of the second EX-G048A. - Page 8 ACE PLUS CORP. EX-G048A Monitor 2 Y-cable EX-G048A Monitor 1 Monitor 4 EX-G048A Monitor 3 Monitor 6 EX-G048A Monitor 5 Page 8 of 11 Headquarters : 9F-2., No. 190 Sec. 2 Jung Shing Rd.,Hsin-dian, Taipei, Taiwan 231 TEL: +886-2-2912-4201 FAX: +886-2-2912-3164 Website: www.ace-plus.com...
-
Page 9: Remote Control
ID selection mode. Press up or down arrow button to select an ID. Once the ID selected matches the ID of the EX-G048A, green LED lights. Channel selection mode. Press this button before you would like to turn on/off any channel of a particular device. -
Page 10: Limited Warranty
Monitor 14 Monitor 15 1. Assign an ID (0-7) for each EX-G048A via the rotary switch. You can assign the same ID for two or more devices so that you can control these devices simultaneously. 2. Like the above example, if the monitor 15 needs to be turned off, follow the steps below. - Page 11 ACE PLUS CORP. The SELLER warrants the EX-G048A 1x3 DVI Splitter to be free from defects in the material and workmanship for 1 year from the date of purchase from the SELLER or an authorized dealer. Should this product fail to be in good working order within 1 year...