Storing And Transferring Data Via Usb - SmartDisk NetDisk User Manual

Self-Powered Mode:
1. Connect the included AC Adapter to NetDisk, and then
to a wall outlet.
2. Then locate the power switch on the back of the
NetDisk, and slide it to the ON position.
3. Next connect the included 3-connector USB cable from
the USB port on NetDisk to the USB port on your PC
(one connector of the 3-connector USB cable will be
unused).
The NetDisk will mount automatically, and a new icon will
appear in My Computer representing your NetDisk.
Note: If you are using a USB 1.1 port on your Windows computer,
the following cautionary note may appear on your display: Hi-
Speed USB Device plugged into non-Hi-Speed USB hub. This
does not indicate a problem because NetDisk is compatible with
both USB 1.1 and USB 2.0 ports. Simply close the message and
proceed. However, in this case NetDisk will operate only at USB
1.1 speeds.

Storing and Transferring Data via USB

Once your drive is connected to a computer via USB, it can be
accessed and used like any other removable disk. You can drag files
to your NetDisk's icon to copy them, navigate to your hard drive in
Open or Save dialog boxes, or delete files stored on your SmartDisk
5