Dvd Burner Manual; Connecting The Burner To The Camera; Burning Dvds; Play - JVC Digital Movie Camera with Hard Drive Quick Start Manual

DVD Burner Manual (for the JVC Movie Camera with in-built Hard Drive)

Connecting the Burner to the Camera:

1. Ensure that the power switch on the burner is switched off.
2. Connect the associated power supply to the burner.
3. Connect the power cord to the power supply.
4. Plug the power cord into an appropriate socket.
5. Connect the associated USB cable to the burner's USB connection.
6. Plug the Camera power supply cable into an appropriate socket.
7. Switch on the camera.
8. Switch on the burner. The power indication at the front of the burner should display a green light.
9. Connect the associated USB cable to the USB connector of the camera.

Burning DVDs:

10. Open the LCD screen.
11. The make dvd screen will be displayed.
12. Select an item. If you have prepared a play list, choose "select from play list".
13. Then select the file you wish to copy via the navigation button.
14. Press the navigation button 2x to confirm your choice.
15. Press the navigation button right.
16. You will now enter the production list.
17. Select the file. Confirm by pressing the navigation button.
18. Insert the dvd in the burner (DVD-R or DVD-RW).
19. Select execute.
20. The process of burning the DVD will now start.
21. When the process is completed the words select ok will appear.
If you select all scenes, take the following steps.
22. Select the file you wish to copy using the navigation button.
23. Press the navigation button to confirm your choice.
24. Insert the dvd in the burner (DVD-R or DVD-RW).
25. Select execute.
26. The process of burning the dvd will now start.
27. When the process is completed the words select ok will appear.
28. If completed/change disk appears, you need to insert a new dvd. A start will then be made on the second
dvd. Select continue to carry on burning.

Play:

29. Select play dvd on the make dvd screen to check whether the dvd has been correctly burned.