Newnham Research EKKO Projector adapter User Manual page 8

User Guide
At this point, the display driver and application are installed and available for use.
To continue with the configuration, the EKKO Projector hardware will need to be connected as described
in Section 2.3 .
page 8 of 15
NR-05-0001/1.0
When the installation is complete,
Finish
click the button.
If selected, EKKODesk will be
launched.
To configure and use the
EKKO Projector adapter, run the
EKKODesk application from the
start menu:
Start→
Programs→
EKKODesk
This will place the icon shown in the
Windows XP toolbar. The small red
cross on the icon indicates that the
application has not been configured.
Clicking on this icon brings op the
EKKODesk menu.
Add/Remove
Clicking the
shows the Add and Remove
Projector dialog.
Clicking the Remove button
removes the selected projector from
the list.
Clicking the Add button shows the
add projector dialogue.
Newnham Research Ltd
option