Troubleshooting; Technical Specifications; Customer Service - Kärcher K 5.650 Operating Instructions Manual

Troubleshooting

You can rectify minor faults yourself with the
help of the following overview.
If in doubt, please consult the authorized cus-
tomer service.
Danger
Turn off the appliance and remove the mains
plug prior to any care and maintenance work.
Repair works may only be performed by the
authorized customer service.
Appliance is not running

Pull on the lever of the trigger gun; the de-
vice will switch on.

Check whether the voltage indicated on
the type plate corresponds to the voltage
of the mains supply.

Check the mains connection cable for
damages.
Pressure does not build up in the appli-
ance

Check setting at the spray lance.

Remove air from appliance before opera-
tion.
Switch on the appliance without connec-
tion the HP hose (max. 2 minutes) and run
it until the water discharging from the HP
outlet is free of bubbles. Switch off appli-
ance and reconnect HP hose.

Check the water supply.

Pull out the sieve in the water connection
using flat-nose pliers and clean under run-
ning water.
Appliance does not start, motor hums
Cause: Voltage reduction due to weak mains
supply or when using an extension cable.

When switching on, first pull the lever of
the trigger gun and then switch the appli-
ance switch to "I/ON".
Strong pressure fluctuations

Clean high-pressure nozzle: Remove dirt
and debris from the nozzle bore, using a
needle and rinse through with water from
the front.

Check water flow quantity.
12 English
Appliance is leaking

Slight leakage from the appliance pump is
normal. If the leakage increases contact
the authorized customer service.
No detergent infeed

Use spray lance with pressure regulation
(Vario Power).
Turn the spray lance to "Mix" position.

Check the settings at the dosage regula-
tor for detergent.

Check the detergent suction hose for
kinks.

Technical specifications

Power connection
Voltage
1~50 Hz
Connected load
Mains fuse (slow-blow)
Protective class
Protection class
Water connection
Max. feed temperature
Min. feed volume
Max. feed pressure
Max. Suction height
Performance data
Working pressure
Max. permissible pressure
Water flow rate
Detergent flow rate
Subject to technical modifications!

Customer Service

Australia
KÄRCHER Pty. Ltd.
40 Koornang Road
Scoresby, Victoria 3179
1800 675 714 (Free Call)
www.karcher.com.au
240 V
2,0 kW
10 A
I
IP X5
40 °C
10 I/min
0,8 MPa
0,5 m
12 MPa
14 MPa
2030 PSI
7,5 I/min
0 - 0,3 I/min