Netopia 3346N-ENT Installation Manual page 2

4 port router

Hide thumbs Also See for 3346N-ENT:

Netopia 3366C-ENT with Dial Back Up

1. Remove from the shipping carton

a. Netopia Router

b. Lavender RJ-11 Telephone Cable

c. Yellow RJ-45 Ethernet Cable

d. Power Supply

2. Insert one end of the lavender RJ-11 telephone cable into

the DSL port on the routers back panel

3. Insert the other end of the lavender RJ-11 telephone cable

into the wall jack that supports your DSL.

1. The power light on the front of the router will

light solid green when the unit has power

2. The DSL SYNC light will flash green when connecting

with the DSLam. Solid green when connected to the

DSLam. Flashes green when DSL traffic is running

over the router.

3. LAN 1,2,3,4 will be solid green when connected to

each port on the LAN. Flash green when there is activity on each port.

The Dial up light will flash green when dialing. . Solid green when connected to the internet.

Flashes green when Dial Up traffic is running over the router.

4. Insert one end of the yellow RJ-45 Ethernet cable into

the LAN 1 port on the routers back panel

5. Insert the other end of the yellow RJ-45 Ethernet cable

into the network port on the back of your computer or

POS machine