Onboard Headers And Connectors - ASROCK ATW-HC2260 User Manual

2.8 Onboard Headers and Connectors

Onboard headers and connectors are NOT jumpers. Do NOT
place jumper caps over these headers and connectors. Plac-
ing jumper caps over the headers and connectors will cause
permanent damage to the motherboard!
Serial ATA3 Connectors
(SATA_0:
see p.10, No. 16)
(SATA_1:
see p.10, No. 15)
(SATA_2:
see p.10, No. 13)
(SATA_3:
see p.10, No. 12)
(SATA_4:
see p.10, No. 9)
SATA3_5 SATA3_4 SATA3_3 SATA3_2 SATA3_1 SATA3_0
(SATA_5:
see p.10, No. 7)
Vertical Type A USB 2.0
(USB1)
(see p.10, No. 8)
USB 3.0 Headers
(19-pin USB3_2_3)
(see p.10, No. 24)
IntA_P_D+
IntA_P_D-
GND
IntA_P_SSTX+
IntA_P_SSTX-
GND
IntA_P_SSRX+
IntA_P_SSRX-
Vbus
Vbus
IntA_P_SSRX-
IntA_P_SSRX+
GND
IntA_P_SSTX-
IntA_P_SSTX+
GND
IntA_P_D-
IntA_P_D+
23
These six Serial ATA3
(SATA3) connectors sup-
port SATA data cables for
internal storage devices.
The current SATA3 interface
allows up to 6.0 Gb/s data
transfer rate.
There is one USB 2.0 port
on this motherboard.
Besides two USB 3.0 ports
ID
on the I/O panel, there is
one header on this mother-
board. This USB 3.0 header
can support two ports.
1