Table of Contents
Advertisement
Before you install the motherboard, study the configuration of your chassis
to ensure that the motherboard fits into it.
2.1 Pre-installation Precautions
Take note of the following precautions before you install motherboard com-
ponents or change any motherboard settings.
1.
Make sure to unplug the power cord before installing or
removing the motherboard. Failure to do so may cause
physical injuries to you and damages to motherboard com-
ponents.
2.
In order to avoid damage from static electricity to the
motherboard's components, NEVER place your motherboard
directly on a carpet. Also remember to use a grounded wrist
strap or touch a safety grounded object before you handle
the components.
3.
Hold components by the edges and do not touch the ICs.
4.
Whenever you uninstall any components, place them on a
grounded anti-static pad or in the bag that comes with the
components.
5.
When placing screws to secure the motherboard to the
chassis, please do not over-tighten the screws! Doing so
may damage the motherboard.
2.2 Screw Holes
Place screws into the holes indicated by circles to secure the motherboard
to the chassis.
Chapter 2: Installation
14
Advertisement
Table of Contents
