Troubleshooting - Cisco Linksys ATA Quick Manual

Linksys ATA

Troubleshooting

ATA Reboot
Periodically, the phone may require a user reboot.
Reasons for this include accepting a new configuration or new
software upgrade.
Unplugging and re-plugging in the power to your phone is NOT a
reboot for this setup. You must unplug the power to the Linksys
ATA. Wait ten seconds and then plug in the power supply again.
Note:
The reboot process is complete when three or four lights
blink blue or green.
It is normal to see red lights on the ATA during a reboot process.
If you have red lights on the ATA after 30 seconds, please contact
customer service.
1-800-942-4700 masergy.com