NETGEAR N300 Easy Manual page 3

Let's get
started.
Your telephone now plugs
into the green socket marked
Phone of the DSL splitter.
Plug the short end of
6
the DSL splitter into
the telephone jack.
7
Connect the 12vDC power supply into
1
your router and into a power socket
Take the dark grey cable and plug the
2
one end into red socket marked DSL on
the DSL splitter and the other end into
the power supply port marked IN
Take the light grey cable and plug the
3
one end into the power supply port
marked OUT and the other end into the
back of the router.
Plug the yellow LAN cable into the yellow
4
port on the back of the router, and the other
end into the LAN port on your computer.
Switch your router on by pressing the power
5
button at the back of the router.