Specifications - Sony DSC-T11 Service Manual

Digital still camera differences manual
Hide thumbs Also See for DSC-T11:
Table of Contents

Advertisement

DSC-T11
x Camera
[System]
Image device
7.66 mm (1/2.4 type) color CCD
Primary color filter
Total pixels number of camera
Approx. 5 255 000 pixels
Effective pixels number of camera
Approx. 5 090 000 pixels
Lens
Carl Zeiss Vario-Tessar
3 zoom lens
f = 6.7 – 20.1 mm (38 – 114 mm when
converted to a 35 mm still camera)
F3.5 – 4.4
Exposure control
Automatic exposure, Scene selection
(8 modes)
White balance
Automatic, Daylight, Cloudy,
Fluorescent, Incandescent, Flash
File format (DCF compliant)
Still images: Exif Ver. 2.2 JPEG
compliant, DPOF compatible
Audio with still image: MPEG1
compliant (Monaural)
Movies: MPEG1 compliant
(Monaural)
Recording media
"Memory Stick Duo"
Flash
Recommended distance (ISO set to
Auto):
0.3 m to 1.5 m (11 7/8 inches to
59 1/8 inches) (W)
0.5 m to 1.5 m (19 3/4 inches to
59 1/8 inches) (T)
[Input and Output connectors]
Multi connector
[LCD screen]
LCD panel
6.2 cm (2.5 type) TFT drive
Total number of dots
211 200 (960220) dots
CAUTION :
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH
MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.

SPECIFICATIONS

[General]
Used battery pack
NP-FT1
Power requirements
3.6 V
Power consumption (during shooting)
1.6 W
Operating temperature
0°C to +40°C (+32°F to +104°F)
Storage temperature
–20°C to +60°C (–4°F to +140°F)
Dimensions
102.5◊601 7.3 mm
(4 1/82 3/811/16 inches)
(W/H/D, excluding maximum
protrusions)
Mass
Approx. 186 g (6.6 oz) (including
battery pack NP-FT1, "Memory Stick
Duo" and wrist strap)
Built-in microphone
Electret condenser microphone
Built-in speaker
Piezo-electric speaker
Exif Print Compatible
PRINT Image Matching II Compatible
PictBridge Compatible
xUC-TB USB cradle
[Input and Output connectors]
A/V OUT (MONO) jack (Monaural)
Minijack
Video: 1 Vp-p, 75 Ω, unbalanced,
sync negative
Audio: 327 mV (at a 47 kΩ load)
Output impedance 1 kΩ
USB jack B
USB connection
High-Speed USB
(USB 2.0 High-Speed compatible)
DC IN jack
Camera connector
— 2 —
x AC-LM5 AC Adaptor
Power requirements
100 to 240 V AC, 50/60 Hz
Current consumption
0.2 A
Power consumption
10 W
Rated output voltage
4.2 V DC, 1.5 A
Operating temperature
0°C to +40°C (+32°F to +104°F)
Storage temperature
–20°C to +60°C (–4°F to +140°F)
Dimensions
Approx. 473080
mm
(1 7/81 3/163 1/4 inches)
(W/H/D, excluding projecting parts)
Mass
Approx. 170 g (6.0 oz) excluding
power cord (mains lead)
x NP-FT1 battery pack
Used battery
Lithium-ion battery
Maximum voltage
DC 4.2 V
Nominal voltage
DC 3.6 V
Capacity 2.4 Wh (680 mAh)
x Accessories
• AC-LM5 AC Adaptor (1)
• Power cord (mains lead) (1)
• UC-TB USB cradle (1)
• USB cable (1)
• NP-FT1 battery pack (1)
• A/V connecting cable (1)
• Wrist strap (1)
• Carrying case (1)
• "Memory Stick Duo" (32 MB) (1)
• Memory Stick Duo Adaptor (1)
• CD-ROM (USB driver SPVD-013) (1)
• Operating instructions (1)
Design and specifications are subject to change
without notice.

Advertisement

Table of Contents
loading

Table of Contents