Advertisement
PROBLEM
Remote controller
is not working.
Timer function
does not set.
The indicator
is blinking
continuously.
Odors permeate in
the room during
operation.
Error is indicated.
Noise is generated.
Smoke is
generated from
the outdoor unit.
Water is dropping
from the outdoor
unit piping
connection.
SOLUTION
• Check if your batteries are depleted.
• Make sure nothing is blocking your remote controller sensor.
• C heck that there are strong lighting apparatus near the air
conditioner. Strong light which comes from fluorescent bulbs or
neon signs may interrupt the electric waves.
Check if you press the Set button on the remote controller after you
have set the time.
P ress the Power button or disconnect the power plug/switch off
the auxiliary power switch.
If the indicator is still blinking, contact the service center.
Check if the appliance is running in a smoky area. Ventilate the
room or operate the air conditioner in Fan mode for 1~2 hours. (We
do not use smelly components in the air conditioner.)
• When an indoor unit indicator blinks, contact the nearest service
center.
• D epending on the status of the air conditioner usage, noise can
be heard when refrigerant flow movement changes. It is normal.
• I f may not be a fire but it can be a steam generated by the defrost
operation from outdoor heat exchanger during Heat mode in
winter.
• Water may be generated because of the temperature difference.
It is normal.
17
Hide quick links:
Advertisement
