e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's opera
tion. If damaged, have the power tool repaired before
use. Many accidents are caused by poorly maintained
power tools.
f) K eep cutting tools sharp and clean. Properly main
tained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits, etc.,
in accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
5) Service
*7'8*9$'5.(%'".4$%'-..3'!$%9+)$6'25'*':(*3+;$6'%$"*+%'
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
Warning! To reduce the risk of injury, the user must
read the instruction manual.
Separate collection. This product must not be
disposed of with normal household waste.
Grease gun can develop high pressure up to 7,000 psi
(482 bar). Use safety glasses and gloves for protection
during operation. Keep hands clear of the exposed rubber
portion of hose.
Extreme pressure may cause nozzle extension of whip hose
to burst. Use only Lincoln APPROVED hoses and follow
whip hose instructions and warnings.
Minimum Gauge for Cord Sets
Volts
Total Length of Cord in Feet/Meters
Ampere Rating 120V 25 / 7.6
240V 50 / 15.2 100 / 30.5 200 / 61.0 300 / 91.4
More
Not More
Than
Than
0
6
18
6
10
18
Form 430233
50 / 15.2
100 / 30.5 150 / 45.7
AWG
16
16
14
16
14
12
Models AC2400 & AC2440
PowerLuber Grease Gun
TOOL USE AND CARE
<1
Do not use the PowerLuber if the switch does not turn it on
and off. A PowerLuber that cannot be controlled with the
switch is dangerous and must be repaired.
<1
Disconnect the plug from the power source before making
any adjustments, changing accessories or storing Power
Luber. Such preventive safety measures reduce the risk of
starting the PowerLuber accidentally.
<1
Store idle PowerLubers out of the reach of children and do
not allow persons unfamiliar with the PowerLuber or these
instructions to operate it. PowerLubers are dangerous in the
hands of untrained users.
<1
Maintain PowerLubers. Check for misalignment or binding
of moving parts, breakage of parts and any other condition
that may affect the PowerLuber's operation. If damaged,
have the PowerLuber repaired before use.
<1
Be sure your power supply agrees with the nameplate
marking. Voltage decrease of more than 10% will cause
loss of power and overheating. If this tool does not operate,
check power supply.
<1
Do not continue to hold down trigger if grease gun is stalled.
=/%+1$)47010'9'3#1(/#19)().1).1$'4+#1&.#,
<1
Use only accessories that are recommended for this model.
Only accessories that are capable of handling 7000 PSI
(482 bar) should be used.
SERVICE
<1
!#.>%$#194+(1?#1"#.@).9#01)*7;1?;1A4'7%.#"'%.1"#.
+)**#7,1!#.>%$#1).19'%*(#*'*$#1"#.@).9#01?;14*A4'7%
personnel may increase the risk of injury.
<1
When servicing a PowerLuber, use only Lincoln replace
ment parts. Use of unauthorized parts may increase the risk
of injury and will void the warranty.
SPECIFICATIONS
Basic PowerLuber Model AC2400
Operating Power, Volt 120 AC
Rated Current 2 amps
Maximum Operating Pressure, psi (bar) 7,000 (482)
Grease Reservoir Capacity, oz. (cm³) 14.5 (411)
Operating Temperature Range, °F(°C) 0 to120 (18 to+50)
Operating Current, at
1,000 psi (69 bar) 1.6 amps
7,000 psi (482bar) 2.75 amps
Lubricant (Grease) up to NLGI #2
Grease output, oz./min(cm³/min) at 1000psi (69bar)
("L" Setting) 3.6 (106.5)
Grease output per stroke, oz(cm³) ("L" Setting)
at 1000psi(69bar). 021 (.62)
Weight, lbs. (kg) 8.2 (3.76)
Accessories:
Outlet Hose Model 1230
pressure rating, psi(bar)
length of the Hose, In (mm)
MODELS
Sales Model Basic PowerLuber
AC2440
AC2400
7,500 (510)
30 (760)
Case
286150
Page Number 3