Lexmark X125 Service Manual page 44

4412-00X
Auto Reduction
When receiving a document as long or longer than the paper
installed in your machine, the machine can reduce the data in the
document to fit into your recording paper size.
Turn on this feature if you want to reduce an incoming page that may
otherwise need to be divided into two pages with only a small portion
on the second page. If the fax machine cannot reduce the data to fit
one page with the feature enabled, the data is divided and printed in
actual size on two or more sheets.
1. Press Setup.
2. Press Menu until 'Auto Reduction' displays. To turn only the
vertical reduction feature On, press Start or Setup when On is
displayed. The machine reduces an incoming page containing
overflow data only in vertical. Press Start or Setup when Off is
displayed to turn this feature on.
Discard Size
When receiving a document as long as, or longer than, the paper
installed in your fax machine, you can set the fax machine to discard
any excess image at the bottom of the page to fit into the recording
paper size. If the receiving page is outside the margin you set, it
prints on two sheets of paper at the actual size. If the data is within
the margin, and the Auto Reduction feature is turned on, it reduces
to fit into the appropriate size paper (Discard does not take place). If
the Auto Reduction feature is turned Off or fails, the data within the
margin is discarded.
1. Press Setup.
2. Press Menu until 'Discard Size' displays in the top line of the
LCD.
3. Enter the length using the numbers on the keypad.
Retry Interval
1. Press Setup.
2. Press Menu until 'Retry Interval' displays.
3. Enter the number of minutes (from 1 to 7) using the numbers on
the keypad.
3-8
Service Manual