Advertisement
ADSL2+ Modem With Wireless-N Router Quick Installation Guide
configuration of the router at first. In this section, you can set the
wireless network parameters required to access the AP of your WLAN
interface.
Go to Setup->WLAN->Basic page, you can configure the wireless
parameters.
Here you may enable or disable the wireless function. You can also
change the wireless parameters, such as Band, SSID, Channel Width,
Control Sideband, Channel Number and Radio Power.
Figure 10
Step 2: Go to Setup->WLAN-> Security page, you can configure the
wireless security parameters.
8
Advertisement
