Whirlpool Electric Down Draft Surface Unit Installation Instructions Manual page 6

0
0
Install Surface Unit
Place surface unit on its side (resting on unfolded cardboard
corner insert from shipping carton). Remove wood skids
from bottom, install Venting Adapter to Blower Housing
by using the three screws provided. See Figure 8.
NOTE:
Because of the length of the Venting Adapter,
the Blower Housing should be rotated downward in
order to clear the cabinet opening
Insert unit into countertop opening and tighten hold down
bolts at each end of unit as shown in Figure 9.
Install the cooking components in the surface unit. (For
the correct installation procedure, see Use and Care Guide
in the Literature Package.)
ENT ADAPTER
MOUNTING SCREWS
\ \ \ \ BLOWER \ 7
6