Whirlpool Electric Down Draft Surface Unit Installation Instructions Manual page 4

Ei
Install Ventilation System
THROUGH-THE-WALL INSTALLATION
(Outside Wall Installation Shown)
BLOWER
HOUSING
Install directly to outside following dimensions shown
below.
CENTER
LINE TO
EXHAUST VENT
SPECIAL NOTE:
For shipping reasons, the Blower Housing will not be
positioned at the proper angle for venting. To correct,
simply grasp the Blower Housing and rotate it to the
proper angle needed for your installation application.
See Figures 5 & 6.
THROUGH-THE-FLOOR INSTALLATION
(Peninsula or Island Installation Shown)
BLOWER
HOUSING
Install between floor joists following dimensions shown
below.
CENTER LINE OF
EXHAUST VENT
w '
--
5-3/4" ikOM CENTER
I
LINE OF VENT TO
FRONT EDGE OF
J
4