Sharp HSDPA WX-T930 User Manual page 84

Area Info (M 4-6)
The Area Info is the message information that operators
send to subscribers in certain areas.
When you receive Area Info, the message (area code) is
displayed in stand-by.
Enabling/Disabling Area Info
→
"Messages" "Area Info"
1.
Select "On" or "Off".
Note
• This function may not be available on all mobile
phone networks. Contact your service provider for
more information.
• If Area Info is set to "On", the stand-by time will
decrease.
Messaging Settings
General Settings
→
"Messages" "Messaging Settings"
"General Settings"
1.
Select the item you wish to set up.
• "Signature":
Enables or disables "Auto Insert". Select "Edit"
to edit current signature.
(M 4-7)
→
• "Auto Delete":
Sets whether to delete the oldest message
automatically when the Inbox, Sent or Both
(Inbox and Sent) is full.
• "Message List View":
Switches the mailbox listing.
• "Inbox Display Settings":
Switches the Inbox listing.
• "Sent Box Display Settings":
Switches the Sent box listing.
• "Scroll Unit":
Scroll through messages by "Single Line", "Half
Page" or "Whole Page".
• "Message Type":
Sets the type of message that can be created to
either SMS or MMS. When set to "Free", the
message is sent automatically either as an SMS or
MMS as appropriate.
When set to "SMS", the functions for MMS are
not available.
• "Animation View":
Enables or disables the animation view function.
Select "On" to display an animation in the
background for specific pictograms when
reading messages containing them.
Messages 83