Sharp HSDPA WX-T930 User Manual page 127

Assigning Pictures (M 9-2-2)
Pictures can be displayed when turning the power on or
off, when receiving an incoming call, or when
operating the alarm.
Pictures taken with the phone's digital camera or
images downloaded from a WAP site can be used.
To Set Built-in Pictures
→
"Settings" "Phone Settings" tab
→
Settings" "Assign Pictures"
1.
Select the desired function to set the picture to.
2.
Select "Preset Animation" when you select "Power
On" or select "Power Off" in step 1.
Select "Pattern 1", "Pattern 2" or "Pattern 3" when
you select "Incoming Voice Call", "Incoming
Video Call" or "Alarm" in step 1.
To Set Saved Pictures
→
"Settings" "Phone Settings" tab
→
Settings" "Assign Pictures"
1.
Select the desired function to set the picture to.
2.
Select "Picture Gallery", "Flash
Documents".
3.
Select the desired picture.
4.
After displaying the picture, press B.
126 Settings
→
"Display
→
"Display
®
" or "Other
5.
Specify the area you wish to display using the
navigation keys, then press B.
Note
• Some pictures cannot be used because of their
picture and data types.
Setting VeilView (M 9-2-3)
→
"Settings" "Phone Settings" tab
→
Settings" "VeilView"
1.
Select "Pattern Setting".
Set the veilview pattern and the scale of the pattern.
If you select "animation" as the scale, the scale of
the pattern automatically changes continuously.
2.
Select "Density Setting".
Set the veilview density.
Note
• Veilview can be linked to a theme. Select "Theme" in
step 1.
→
"Display