Honda 2005 Accord Owner's Manual page 122

Main Menu Table of Contents
Playing the AM/FM Radio
Preset Each side of the bars (1
6) or preset icon can store one
frequency on AM, and two
frequencies on FM.
1. Select the desired band, AM or
FM. FM1 and FM2 let you store
two frequencies with each side of
the preset bar or each preset icon.
On models without navigation system
First push the AUDIO DISPLAY
button to view the preset icons.
2. Use the TUNE, SEEK, or SCAN
function to tune the radio to a
desired station.
3. Pick a preset number (1 6), and
hold it until you hear a beep.
Press the left or right side of the
bar or icon and hold it until you
hear a beep.
120
4. Repeat steps 1 through 3 to store a
total of six stations on AM and
twelve stations on FM.
The preset frequencies will be lost if
your vehicle's battery goes dead, is
disconnected, or the radio fuse is
removed.
AUTO SELECT If you are
traveling far from home and can no
longer receive your preset stations,
you can use the auto select feature to
find stations in the local area.
Press the A. SEL button or touch the
AUTO SELECT icon. ''A. SEL''
flashes in the display (the upper
display on models with navigation
system), and the system goes into
scan mode for several seconds. It
stores the frequencies of six AM,
and twelve FM stations in the preset
bars or icons.
You will see a ''0'' displayed after
pressing a preset bar or icon if auto
select cannot find a strong station for
every preset bar or icon.
If you do not like the stations auto
select has stored, you can store
other frequencies on the preset bars
or icons as previously described.
press the
To turn off auto select,
A.SEL button or touch the AUTO
SELECT icon. This restores the
presets you originally set.
Adjusting the Sound
Press the SOUND button repeatedly
to display the bass (BAS), treble
(TRE), balance (BAL), and fader
(FAD) settings. On models with
navigation system, touch the
SOUND icon or press the TUNE
knob.