Mechanism Operation - Sanyo DC-DV610KR Service Manual

MECHANISM OPERATION

1.How to setting the tray.
1
1. The GEAR move from side to side.
2. Match the mark of GEAR
and then install the BOSS.
1
3. Turn the GEAR counterclockwise, and then SLIDE
move right side.
CHASSIS
FRONT SIDE
MOTOR
6. Match the hole of GEAR
6
GEAR .
7. Match the mark of LOADING GEAR
9
where see horn hole of tray.
8. Push a tray with the state that turned the entire surface of a
tray into approximately 5 degrees the lower part slowly.
2 3
and mark of GEAR
3
2
MARKER
1
3
MARKER
7
and hole of chassis while turning
8
and gear of TRAY
4. Move the SLIDE left side.
5. Match the Hole of GEAR
,
2
- 4 -
5
and Hole of CHASSIS
LARGE TOOTH
RIB
GREASE
EM-50L
6
MARKER
9
TRAY
4
.
GREASE
EM-50L
RIB
CHASSIS HOLE
4
GEAR HOLE
5
GREASE
EM-50L
7
HOLE
8
MARKER
LOARDING
GEAR