Table of Contents
Advertisement
CABINET DISASSEMBLY INSTRUCTIONS
1. Disassembly Flowchart
This flowchart indicates the disassembly steps for the
cabinet parts, and the CBA in order to gain access to
item(s) to be serviced. When reassembling, follow the
steps in reverse order. Bend, route and dress the
cables as they were.
[11] IR Sensor
CBA
[10] Speaker (s)
[1] Rear Cabinet
[6] Jack Holder
[7] Main CBA
[8] LCD Main CBA
Unit & Liquid Crystal
Panel Unit
[9] Function CBA
[12] Front Cabinet
2. Disassembly Method
Step/
Loc.
Part
Fig.
No.
No.
Rear
[1]
D1 10(S-1), 2(S-2)
Cabinet
[2]
Stand A
D1 4(S-3)
[3]
Bracket
D1 4(S-4), Shaft
[4]
Holder
D1 4(S-5)
[5]
Stand B
D1 ---------------
[6]
Jack Holder D2 3(S-6), (S-7)
D2
[7]
Main CBA
D3
LCD Main
CBA Unit &
[8]
Liquid
D2 11(S-9), *CN106
Crystal
Panel Unit
Function
[9]
D2 4(S-10)
CBA
[2] Stand A
[3] Bracket
[4] Holder
[5] Stand B
Removal
Remove/*Unhook/
Unlock/Release/
Unplug/Unclamp/
Desolder
9(S-8), *CN53,
*CN101B, *CN102B,
*CN103B, *CN401,
*CN403, *CN801,
*CN802
Step/
Loc.
Part
No.
[10] Speaker (s) D2 6(S-11)
IR Sensor
[11]
CBA
Front
[12]
Cabinet
↓
↓
(1)
(2)
Note:
(1) Order of steps in procedure. When reassembling,
follow the steps in reverse order. These numbers
are also used as the Identification (location) No. of
parts in figures.
(2) Parts to be removed or installed.
(3) Fig. No. showing procedure of part location
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
CN = Connector
* = Unhook, Unlock, Release, Unplug, or Desolder
e.g. 2(S-2) = two Screws (S-2),
2(L-2) = two Locking Tabs (L-2)
(5) Refer to the following "Reference Notes in the
Table."
Note
---
---
---
---
---
---
---
---
---
4-1
Removal
Remove/*Unhook/
Fig.
Unlock/Release/
No.
Unplug/Unclamp/
Desolder
D2 (S-12)
D2 ---------------
↓
↓
(3)
(4)
Note
---
---
---
↓
(5)
L4534DC
Advertisement
Table of Contents
