Remote Control; Battery Installation; Effective Distance Of The Remote Control Transmitter - Memorex MT2028D-BLK User Manual

BATTERY INSTALLATION

Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated next to the battery compartment.
Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and Carbon-zinc) or old batteries with
fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from
possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery
manufacturer's directions.)

EFFECTIVE DISTANCE OF THE REMOTE CONTROL TRANSMITTER

REMOTE CONTROL

1. Remove the Battery Compartment cover by pushing in on the tab and
lifting the cover off.
2. Install two (2) "AAA" batteries (not included), paying attention to the
polarity diagram in the Battery Compartment.
3. Replace the Battery Compartment cover.
BATTERY PRECAUTIONS
MUTE
Q.VIEW INFO
INPUT EXIT
SAP P.MODE
0
ENTER -
CH+
VOL VOL
MENU
- +
CH-
CC SLEEP FAV.LIST
GUIDE ARC CH.LIST
7
NOTES:
• When there is an obstacle
between the TV and the
transmitter, the transmitter may
not operate.
• When direct sunlight,
incandescent lamp, fluorescent
lamp or any other strong light
shines on the Remote Sensor
of the TV, the remote operation
may be unstable.
an