Memorex MT2028D-BLK User Manual page 27

SETTING THE ATSC CHANNEL LIST
1
E
SAP P.MODE
0
-
ENTER
4
CH+
VOL VOL
MENU
- +
3
CH-
FAV.LIST
CC SLEEP
ARC CH.LIST
GUIDE
Press the CH.LIST button 1 and the channel list will display
on-screen. Then press the CHANNEL Up 2 or Down 3
button to select the Channel. Press the VOLUME Up button
4 to select between SKIP ON and OFF.
NOTE: Make sure the channel system is set as shown on
page 18.
NOTE:
When Skip On is set for a channel, you cannot select it using the CHANNEL Up or Down buttons. You must use the Direct
Channel Selection buttons (0-9) to select the channel. If you would like to use the CHANNEL Up or Down buttons to select
the channel, set the channel to Skip Off.
SETTING THE MENUS (CONTINUED)
CHAN NEL LIST
CHANNEL CH NAME SKIP
5-1 KPIX-DT OFF
6 OFF
10-1 WCAU-DT OFF
13 OFF
OFF
14
ATSC-1 OFF
14-1
26