Download  Print this page

Preparing The Vacuum Cleaner For Use; Connect Accessories; Operating The Vacuum Cleaner; Starting Work - Kärcher A 2701 User Manual

Karcher vacuum cleaner user manual.
Hide thumbs


Preparing the vacuum cleaner
for use
! Undo both fasteners and take the motor
housing off the dirt container.
! Take the wheels and swivel castors out of the
dirt container and press them into the
designated sockets. The wheels "click" into
! Attach the accessories bracket.
For dry vacuuming:
! Insert the paper filter bag.
Note: Coarse, dry dirt can also be vacuumed up
without the paper filter bag.
! Place the motor housing on the dirt container
and close both fasteners.

Connect accessories.

! Insert the suction hose into the connection on
the unit. The suction hose "clicks" into position.
! Connect the two suction tubes to each other
and then to the suction hose.
! Connect the floor nozzle to the suction tube.
Note: For normal use the crevice tool is connected
directly to the curved handle. However, the crevice
tool can also be fitted directly to the suction tubes.

Operating the vacuum cleaner

Starting work

! Check that the paper filter bag and the dirt
container are not yet full.
! Insert the mains plug into a socket.
! Switch the unit on when you want to start work.
! The floor tool can be adjusted with your foot for
vacuuming hard floors or carpets.


Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: