3. O peration inst ructions
Start reader:It will begin selftesting function when pow er is switche d on.Its operation
procedure s are a s follo w:
LCD DISPLAY
SRAM TESTING
RTC TESTING
INITIAL FUNCTION
<<XD200>> 08:05
<<ST680>> 08:05
0010
0010
Note: Card must not exceed the read range (refer to different m odels) to
gain induction.
a).OK (green) light is on to indicate registered card to gain access.
b).DENY (yellow) light is on and consecutive beeping sound is on to
indicate unregistered card or used under unauthorized time zone.
(Please refer to troubleshooting if neither of above statuses occurred)
Mode inquiry: Press
MD
ADR
R epress
Antiduress: When under duress, usermay press
Setup Mode:
SYSTEM FUNCTIONS
SELECTION : _ _
Mem ory tesying
Real time clock teseing
Initial system setting
Model (XD200), Time (08:05), 10 registrations
Model (ST680),present time (08:05),10 registrations.
, LCD will display:
* # #
: open do or mode (2 shows door open by proxim ity card
sensing, 3 shows do or open by proximity card sensing with
password.)
: main reader number.
to escape.
*
in password to activate alarm.(Duress code presetting is
, it can be changed by user)
*
Example : antiduress code is
then to activate antiduress alarm, the user should key in
.
1 1 2 3 4
User must get into setting mode first before
changing any system functions. User must
key in
function selection.
set
(Example: User can get into the set up mode
by keying
INSTRUCTIONS
YYYY/MM/DD
, password is
1
system password
#
System password
initially by manufacturer.
5 6 78
# 5 6 7 8#
5
MD ADR YYYY/MM/DD
2 001 1999 / 01 / 01
: current date.
button before keying
*
1 2 3 4
for system
#
).
,
is being