Page 1
OGF - ZC Series OPEN GAS FIREBOX INSTALLATION & OPERATING INSTRUCTIONS MODELS: OGF - 2.7/ZC OGF - 3.0/ZC OGF - 3.5/ZC FLUE SPIGOT HOT AIR OUTLETS FIREGRATE ‘GFG’ FIREFOX ‘OGF-ZC’ FIREBOX ELECTRIC CORD FAN SWITCH CONTROL COVER PANEL GAS INLET...
INSTALLATION REQUIREMENTS DEFINITION Installation of a Firefox OGF-ZC series open fronted steel firebox into a timber framed and plasterboard enclosure in conjunction with the specified steel flueing system to draw and exhaust combustion gases up and away from the gas log firegrate.
Page 3
MATERIALS AND MAINTAIN 25mm CLEARANCE TIMBER FRAME PLASTER BOARD CLEAR FROM TOP OF UNIT FIREFOX GAS FIREGRATE (’GFG’) BASE OF UNIT F.L. NOTE: DO NOT LOCATE ANY 6mm THK NON COMBUSTIBLE ALIGN FACE OF FIREBOX FLUSH EXTRACTION AIR DEVICE WHICH FOREHEARTH &...
OGF - ZC Series OPEN GAS FIREBOX SPECIFICATIONS FLUE FLUE SPIGOT SPIGOT GAS PIPE INLET SWITCH GAS PIPE INLET POWER SUPPLY FRONT RIGHT HAND SIDE FLUE SPIGOT POWER SUPPLY For installation and FIREBOX DIMENSIONS APPROPRIATE GAS FIREBOX FLUE commisioning procedure of FIREGRATE ‘GFG’...
Page 5
A non-combustible floor protector (forehearth) at the base directly in front of the firebox opening must be a minimum of 6mm thick, project a minimum 300mm forward and 200mm on each side of the firebox opening. MANTLEPIECE BREAST FIREFOX OGF UNIT...
If your installer has not shown you how to light the FIREFOX gas firegrate which has been fitted into the unit, refer to the separate booklet entitled INSTALLATION & OPERATING INSTRUCTIONS - GFG SERIES (Gas Firegrates -L/C effect) under Lighting Burner &...
Need help?
Do you have a question about the OGF - 2.7/ZC and is the answer not in the manual?
Questions and answers