Example Of Installing An Environmental Model - Samsung SCP-2370 User Manual

connection & installation

EXAMPLE OF INSTALLING AN ENVIRONMENTAL MODEL

❖
Fix the installation base with the bracket
1.
Fix the base with the bracket by turning it clockwise.
2.
As shown in the picture below, gently press and lift up the handle
of the hinged door on the bottom of the installation base. Please
refer to the "Camera Wiring Interface Board" on page 18, connect
the wires.
J

Do not connect the camera to a power outlet until the installation is complete.
Supplying power while the installation is in progress may cause fi re or damage
the product.
3.
Connect the camera safety wire to the installation
base.
42_ connection & installation
Knob
Safety Cable