Output Analog Properties - Bluefish444 Mac OSX SD User Manual

Output Analog Properties

The Bluefish444 SDI/Analog cards feature the highest quality 12 bit processing allowing adjustment of the output
signal. By using the vertical slider bars on this tab you can adjust various parameters for the output and save them
as the default load up values.
The output signal fields that can be adjusted are;

Luma Gain

U Gain

V Gain

Hue

Black level

Sharpness
NOTE; the output setting are preserved independently for each analog signal type e.g. component, composite, S-
Video and RGB
Unity
This button centers each slider bar to the default values of 0.0 gain
Zero
This buttons returns the values to zero value
Lock U and V Gain
Checking this box will lock the U and V levels together
Apply NTSC Pedestal
Enable pedestal (setup) feature for NTSC analog decks. This is used to control the black levels for output.
43