Typical Connection Workflow 1 - Bluefish444 Mac OSX SD User Manual

Typical Connection Workflow 1

The following example is a typical workflow you might use if your source is SDI but you have analog monitoring for video
and audio and two channels of audio are required.

SDI video I/O

Digital XLR audio I/O 4 Channels of Audio

Analog video and audio monitoring
Your source and master is Digital SDI for video and Digital Audio by AES/EBU XLR.
Your monitoring is Analog component and analog audio.
If your deck supports embedded audio you could I/O the audio via the SDI and monitor the 4 channels via XLR or S/P DIF.
Cable Connection Guide
Feature application Settings

Digital audio routing channels 1 & 2 to Analog left and right

Analog Video output set to Component
(DVID 1) SDI „A‟ OUT Input of Deck
Genlock
(AVID 1) Y/G/CVBS Output
DIG AUDIO IN 1/2
DIG AUDIO IN 3/4
DIG AUDIO OUT1/2
DIG AUDIO OUT 3/4
ANG AUDIO OUT LEFT
ANG AUDIO OUT RIGHT
SDI Monitor
Analog Audio
Monitoring
34