Typical Connection Workflow 2 - Bluefish444 Mac OSX SD User Manual

Typical Connection Workflow 2

The following example is a typical workflow you might use if you wish to edit and monitor with 6 channels of audio for
surround sound 5.1 editing and ingest Digital Video via SDI and Audio via AES XLR

SDI video I/O

Digital XLR audio I/O 6 Channels of Audio

Analog video monitoring - component

Genlock
Your source and master is Digital SDI for video and Digital Audio via AES/EBU XLR .
Your monitoring is Analog component video and analog audio
If your deck supports embedded audio you could I/O the audio via the SDI and monitor the 4 channels via XLR or S/P DIF.
Cable Connection Guide
Feature application Settings
Audio Input set to AES
Audio Monitoring set to AES
Video input set to SDI
Video Analog output set to Component.
(DVID 1) SDI „A‟ OUT
(DVID 1) SDI „A‟ OUT
(DVID 3) SDI „A‟ IN
GENLOCK
(AVID 4) Y/G/CVBS I/O
DIG AUDIO OUT 1/2
DIG AUDIO OUT 3/4
DIG AUDIO OUT 5/6
DIG AUDIO IN 1/2
DIG AUDIO IN 3/4
Digital 5.1 Surround Sound
DIG AUDIO IN 5/6
SDI deck
6 Channels audio
Component Video
Analog Video Monitor
35