Table of Contents
Advertisement
4. INSTALLATION
i
We recommend that use a megapixel lens with manual iris to support the full
resolution of megapixel camera.
Note
4.1. Installing a C/CS Mounting lens
1. Remove the protective rubber cap from the front of the camera.
2. Install the mount ring for lens and adjust the mount ring to fit C or CS lens.
3. Tighten the setscrews using the hex wrench in the package.
4.2. Setting the Image Attribute
You can set the image attribute of camera through the webpage.
The menu of image attribute can be seen under Setup > Video & Audio > Video‐in > Image
Signal Processing. The following features can be adjusted:
•
Brightness
•
Contrast
•
Saturation
•
Sharpness
•
Mirroring
•
Lighting Attribute
For more detailed information, refer to the 'Webpage User's Manual' in the SDK.
CCW
CW
CW
Set Screw
SET SCREW
NM‐IP1100M
*Lens is optional.
8
Advertisement
Table of Contents
