Download Print this page

TapMemo Voice Activated Personal Data Assistant User Manual page 6

Advertisement

Battery Power Meter:
Access the "system setup" menu. Don't remember how? Here is the abstract:
Press the TapKey button. After the tone, say "system setup" and you are there!
Then say "battery level" and TapMemo will respond. Here is a nice table with all
possible responses and the actions you should take:
TapMemo says...
Battery is 100% full
Battery is 70% full
Battery is 40% full
Battery is low
Battery level critical - shutting down
Important! Each time you press the TapKey button, TapMemo measures the
battery level. A low level battery will still enable you to continue, just with a
"battery is low" warning. If the battery level is critically low, TapMemo will warn
you and then go back to sleep. This would be a good time to charge your tired
friend.
For charging instructions and general battery maintenance, look for the "Charging
your TapMemo" chapter close to the end of this manual.
Now that you know how to get a report on battery level, it is time to learn how to
get a report on remaining memory.
Memory Meter:
Access the "system setup" menu. Don't remember how? Just press the TapKey.
After the tone, say "system setup" and you are there!
Now say "memory status" and TapMemo will complain about how much memory
is taken already. You should know that all applications on your TapMemo unit
share a common memory, so if, for example, you have recorded many long
memos, you may not be able to store many appointments in the calendar or
many names in the phonebook. Since we do care about you, we thought of the
following ideas to help you free memory space:
Erase memos that you have recorded but do not remember why. Memos
take up the most memory, so each one you erase will be a small victory
for you.
Erase names of friends and family members who you do not like any more.
As for appointments, TapMemo will erase them for you 24 hours after they
have passed. Isn't that nice?
Speaking of nice things, TapMemo can help you locate itself in case you forgot
where you left it. Here is how that is done:
Unit Locator:
Access the "system setup" menu. Don't remember how? Just press the TapKey.
After the tone, say "system setup" and you are there!
6
You should...
Do nothing
Do nothing
Think about charging
Charge when possible
Charge, Charge, Charge
And...
Smile
Keep smiling
Hmm...
...
Charge some more

Advertisement

loading