Download Print this page

Chapter Four - Charging Your Tapmemo - TapMemo Voice Activated Personal Data Assistant User Manual

Advertisement

Playing back all the appointments names:
Access the calendar menu. Don't remember how? Just press the TapKey. After
the tone, say "calendar" and you are there!
Say "entries playback" and TapMemo will start playing back the names of the
appointments in chronological order, each with its date and time. If you wish to
skip to the next appointment, press the Volume Up button. To go backwards and
hear a previous appointment, press the Volume Down button.
If you press the TapKey button while hearing an appointment name, TapMemo
will ask you if you wish to play or delete that appointment. Say "delete" to delete
this appointment along with its recording. Say "play" if you wish to hear the
appointment details. If you wish to stop the playback, say nothing at the prompt
or press the TapKey button again. After playing or deleting the appointment,
TapMemo will continue with the overall appointments playback.

Chapter Four - Charging your TapMemo

First, some terms you should know: "Battery life" means the time your TapMemo
will run before it must be recharged (sometimes this is also called "play time" or
"run time"). "Battery lifespan" means the total amount of time your battery will
last before it must be replaced.
Since TapMemo's battery is lithium-ion based, it has no memory effect which
means you can charge it at any time, without the need to discharge it fully first.
If TapMemo warns you that it has a low level battery or if you feel like charging
the battery anyway, simply plug the supplied power adaptor into the wall outlet
and plug the small power plug into TapMemo. As soon as you make these
connections, TapMemo will say "charging battery" only once, and the charge cycle
will begin. You can unplug the power plug from TapMemo at any time. A full
charge takes about 4 hours. When it is fully charged, TapMemo will say "charge
complete" once a minute until you disconnect the plug.
Rechargeable batteries have a limited number of charge cycles and may
eventually need to be replaced. Battery life and number of charge cycles vary by
use and settings. Read below for more information:
Paying attention to just a few common sense pointers will pay off with a longer
battery lifespan and battery life for your TapMemo. The most important thing is
to keep your TapMemo out of the sun or a hot car (even the glove compartment).
Heat will degrade your battery's performance the most. Lowering the speaker
volume or better yet, using an earphone, will prolong the time needed between
charges.
If you do not use TapMemo for a long time, be sure to charge it once every 2
months or so. This will keep your TapMemo's battery healthy and happy.
TapMemo Temperate Zone. Your TapMemo works best from 32° to 95° F. That's 0° to 35° C. Keeping your TapMemo
as near room temperature as possible (22° C) is ideal. You should store it in environments of -4° to 113° .
13

Advertisement

loading