Before Starting - Volvo XC90 Navigation System Owner's Manual

Road and traffic information – rti
Hide thumbs Also See for XC90:
Table of Contents

Advertisement

General
The navigation system can be used without a
destination being selected. The map with the
position of the car is shown on the screen
and the car is shown with a blue triangle.
The system is updated continuously and
could therefore contain functions not descri-
bed in this manual.
The system content may vary slightly from
country to country and some menu options
are not available to all countries for technical
reasons.
Startup
The system starts by displaying a screen
where you have to confirm the text content by
pressing ENTER after selecting
mode
) or
Advanced
(
Advanced mode
Used instead of an ignition key in cars fitted with the Keyless system.
1
Map position
After Startup, the Main menu is displayed
briefly until the screen switches to Map
mode. At this point, the current map covers
the entire screen.
Press BACK to activate the Main menu,
see page 24.
Press ENTER to activate the Quick menu,
see page 24.
1. Press the navigation button to activate
Scroll mode, in order to view parts of the
map that are outside of the screen for
example.
2. In this mode ENTER activates the Scroll
menu, see page 24.
Settings
The system is supplied with default settings,
but starts with the settings last made.
If a setting has been changed and the factory
setting is required again then only the current
function is affected.
There is no function that resets all settings
simultaneously.
Easy
Easy
(
).
01 Get to know your navigation system
On/Off
On
The system is switched on automatically
when the ignition key/starter knob
to position I or II.
If the system has been switched off manually,
it must also be switched on manually as fol-
lows:
1. The ignition key/starter knob must be in
2. Press ENTER or BACK.
3. The screen is activated.
The system may need a few seconds in order
to detect the position and movement of the
car.
Off
The system is switched off automatically
when the ignition key is turned to position 0.
The system can be switched off manually so
that it does not start automatically the next
time the ignition key is turned to position I, as
follows:
1. Press BACK to reach the Main menu.

Before starting

1
position I or II (see the instruction manual
for the car).
01
is turned
}}
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents