Saving And Reloading Configurations - Nera F33 User Manual

CONFIGURATION FROM PC
Saving and reloading
configurations
The Nera F33 configuration settings may be stored
on the PC harddisk, e.g. prior to replacing software.
Procedure:
1
Open the Device Manager window as indicated
2
Clicking Devices >Save config to a file
automatically stores the data in a "Config.cgf" file in
the vtLite directory c:/program files/vtLite Marine.
3
After installing the software, the settings may be
transferred back to Nera F33 by pressing Load.
4
Clicking Restore Factory Defaults loads default
Nera F33 configurations.
Printout/storing a configuration summary:
5
Clicking Print Summary opens the Printout
Viewer (see next page) which lists the settings of the
end user equipment, and allows filing and/or printout.
Note!
Save config to a file only saves the Device
Manager settings.
Settings such as Net provider / Access codes / ISDN
protocol are not saved.
Phone book data and traffic log must be saved in the
Book and Log menus.
40
'
CONT D
USER GUIDE
Nera F33