Table of Contents
Advertisement
CONFIGURATION FROM PC
Routing of incoming calls
When applying for IMN numbers, a Terminal Id
(OID/DID) is received from the Net service provider.
All devices connected to Nera F33 can make outgo-
ing calls. For incoming calls it must be assured that
the Terminal Ids and MSN numbers configured are
as commissioned.
To make an incoming call reach a particular device,
an MSN number and the Terminal Id "connected" to
the IMN number must be programmed into the Main
Communication Unit (MCU). See later in this manual.
The table below lists valid MSN numbers for the
available services.
4.8 kbps speech
01*
02*
03*
01/20: - first Nera ISDN Handset
03/22 - first Nera ISDN Handset
02/21 - analogue phone on TA
* Preprogrammed
32
'
CONT
D
VALID TERMINAL IDs AND MSN NUMBERS
9.6 kbps data
20*
21*
22*
21/60, preset for RS-232A port
22/61, preset for RS-232B port
23/62, preset for USB port
Numbers to be programmed into ISDN devices:
In ISDN device:
MSN number
For an easy start, some Terminal Ids and MSN
numbers have been preprogrammed into the MCU
(marked with a star in the table).
Note! A Term.Id already entered is not accepted.
21*
60*
22*
61*
23*
62*
11/40: - fax on TA
USER GUIDE
In Main Communication Unit:
MSN number
and Terminal Id
(the Terminal Id is paired
with a specific IMN number)
9.6 kbps fax
11*
40
12
41
13
42
Nera F33
Advertisement
Table of Contents
